china en442 radiators manufacturers
Knowledge Center
 Home >

Knowledge Center

> Home heating diagram! Is the radiator heated in series or in parallel?

Home heating diagram! Is the radiator heated in series or in parallel?

  • 2022-01-08 16:32

The installation and construction of the radiator should not be ignored as the focus of home improvement. If the installation is not in place, the radiator may not be hot even if it is configured properly. Especially the connection method of the radiator has a great influence on the heat dissipation of the radiator. You must understand the connection method of the radiator! So how to connect the home radiator? What are the connection methods? Today, the editor of Senrad will talk to you in detail. Home heating diagram.
 
 
 
1. Parallel connection of different programs: This installation method separates the inlet and outlet pipes independently, and each group is installed in parallel separately. The pipes are less expensive and have different lengths. It is not suitable for families with too many radiator groups, preferably less than 5 groups.
 
<a href='https://www.heating-radiators.com/a/PRODCUTS/Steel_Radiators/2022/0103/223.html' target='_blank'><u>Home heating diagram</u></a>
 
2. Parallel in the same program: It is basically the same as the parallel in different programs, except that the parallel in the same program is the advanced water and the final unified backwater. The construction technology requirements are high, the distance of each group of heating pipes is equal, the flow is even, more energy-saving, and the heat dissipation is better.
 
<a href='https://www.heating-radiators.com/a/PRODCUTS/Steel_Radiators/2022/0103/223.html' target='_blank'><u>Home heating diagram</u></a>
 
3. Octopus radiation type: add manifold and parallel connection, flow rate adjustment is accurate, convenient for maintenance. The heating pipe is buried underground without joints, and there is no hidden danger of water leakage.
 
Home <a href='https://www.heating-radiators.com/a/PRODCUTS/Column_Radiator/2021/1214/166.html' target='_blank'><u>heating radiator</u></a> diagram
 
Single tube series
 
Simply put, the water in and out is a closed loop formed by connecting the radiators of different rooms in series through a heating pipeline, which saves pipes, but independent flow control of the radiators cannot be performed.
 
 
Is the radiator installed in series or in parallel, which is hotter?
 
In tandem operation, the inlet and outlet water of the radiator passes through a heating pipe, and the outlet water of the front radiator is the inlet water of the rear radiator, so the temperature will gradually decrease, and the heat that the radiator can dissipate will become more and more. small. Therefore, households with more than 4 sets of radiators basically no longer install them.
 
<a href='https://www.heating-radiators.com/a/PRODCUTS/Steel_Radiators/2022/0103/223.html' target='_blank'><u>Home heating diagram</u></a>
 
Relatively speaking, the water supply and return water of the radiator parallel pipes are operated separately, which is convenient to control the flow and temperature. It is the most reasonable and best choice for families now, and the heating effect is even better.
 
 
Whether the radiator is hot enough for heating, in addition to the installation method, the biggest impact is the heating area and material of the radiator. You must pay attention to it when purchasing. Finally, if you want to know more and updated HVAC knowledge, please pay more attention to SUNLIKE.

Copyright! 2021 Sunlike (Tianjin) HAVC Equipment Co.,Ltd.All Rights Reserved. Powered by WILLIAM

IPv6 network supported

IPv6 network supported Google Anylitics Console

contact

Send A Message

Send A Message

    If you are interested in our valves and want to know more details,please leave a message here,we will reply you as soon as we can.

  • supplier
  • contact
  • email