towel rail radiator manufacturer
News
 Home >

News

> Are designer radiators any good ?

Are designer radiators any good ?

  • 2022-01-08 20:27


1. The main appeal of customers is warmth, and aesthetics can be second. What the integrator needs to do is to weaken the visual stimulation of the radiator and the pipeline as much as possible; (When the temperature reaches the demand, if the aesthetics is improved, it will be a great bonus effect)
 
2. Reasonability, energy saving, and comfort can be appropriately relaxed, but not too bad. If the effect is not as good as the split air conditioner, the customer will not choose the wall-hung boiler
 


3. Customers often install before the arrival of winter, so they need to experience it immediately. The system must be hot when it is turned on, and the debugging is successful at one time;
 
4. Since the reserved installation time is short (preferably 1~2 days to complete the installation), the system must be simplified.
 
For the surface installation system, the 
designer radiators selection and location determination have the following principles:
 
1. It is necessary to design each room one by one and communicate well with the home designer; beautiful design is very important.
 
2, the radiator model selection can be more personalized; the 
designer radiators uk that can be placed under the window should be placed under the window as much as possible;
 
3, be sure to use a thermostatic valve with a preset, or use a radiator with a built-in thermostatic valve;
 
4. The 
black designer radiator should be as close as possible to the boiler, and the pipeline should be short, even if it is placed on the inner wall;
 
5. The 
vertical designer radiators model selection is simplified. Try to choose 600mm high products, and use 300mm and 900mm less.
 
6. ​​Model selection depends on large or small, such as two rooms, one room is designed to be 600x1200, and one room is 600x1000. It is recommended that all be unified into 600x1200. Don't have too many models in a set.
 
7. Be sure to use a thermostatic valve with presets, which is beneficial to complete the system balance debugging at one time, otherwise the latter group or several groups may not be hot.


Copyright! 2021 Sunlike. All Rights Reserved. Powered by Vivian

IPv6 network supported

IPv6 network supported Google Anylitics Console

contact

Send A Message

Send A Message

    If you are interested in our valves and want to know more details,please leave a message here,we will reply you as soon as we can.

  • supplier
  • contact
  • email